There is no guarantee that this will repair your problem and no warranty expressed or implied if you destroy your machine. This will NOT always fix the problem, but does a good amount of the time. You will have to scrape away the ground plane with tweezers or a fiberglass pen in order to make this fit.
2012 MACBOOK PRO GPU PANIC PRO
If you have a 2010 15" Macbook Pro with an 820-2850 board with random kernel panics, this will often fix your problem. You may have to run a wire from the ground side to ground and have it up in the air depending on the board.
![2012 macbook pro gpu panic 2012 macbook pro gpu panic](https://venturebeat.com/wp-content/uploads/2019/11/samsungfold2.jpg)
even my 13 inch MacBook Pro hangs after waking up from sleep. Since the release of the 2018 MacBook Pro, users have been sharing similar. apple macbook pro 13 m1 (2020) space gray (apple m1 8-core cpu/13.3/8gb.
2012 MACBOOK PRO GPU PANIC UPDATE
This cap WILL NOT FIT without some creative modifying. If you have a 2008-2009 with an 820-2532, 820-2330, 820-2610, or 820-2390 board that is dead, where C7771 is a tantalum cap that you read 0.331v on instead of 1.05v on, this might help you. I’m sure there will be a firmware update but maybe don’t buy yet unless using on a MacBook. Apple MacBook Pro 13 M1 (2020) Space Gray (Apple M1 8-core CPU/13.3/8Gb/256Gb/8-Core GPU) MYD82. You can confirm this cap is bad with a small bit of heat - it will work again until it cools down. It is too small and the single small tantalum cap is not fit for this circuit, it dies, and causes machine to not turn on when it gets cold.
![2012 macbook pro gpu panic 2012 macbook pro gpu panic](https://i.ytimg.com/vi/zWR-smvDPZ4/maxresdefault.jpg)